Description
These abrasives have sharp, hard grains for fast cutting. Use in tumblers, flat laps, sphere machines, or wherever coarse and fine grinding grits are needed. The grit sequence: 60/90, 220, and 600 are standard, but can be varied depending on material and need, followed by a polish. For best results use an aluminum oxide pre-polish 800 grit before the final polish. Use this same silicon carbide grit sequence including the aluminum oxide pre-polish, in vibratory tumblers as well.
Note: Silicone abrasives are packed in sturdy containers for convenient storage and use. Prevents leakage and contamination.
WARNING: This product can expose you to chemicals, including epichlorohydrin, which is known to the State of California to cause cancer, birth defects and other reproductive harm.
For more information go to www.P65Warnings.ca.gov